AudioControl D-5.1300 D Series 5-channel car amplifier with digital signal processing — 100 watts RMS x 4 at 4 ohms + 500 watts RMS x 1 at 2 ohms
Product highlights:
- 5-channel car amplifier with digital signal processing
- 100 watts RMS x 4 + 300 watts RMS x 1 at 4 ohms
- 200 watts RMS x 4 + 500 watts RMS x 1 at 2 ohms
- 400 watts RMS x 2 bridged at 4 ohms + 500 watts RMS x 1 at 2 ohms
- Class D amp technology
- MILC™ (Maximum Input Level Control) LED optimization and clip indicators
- stereo/mono switch on channel pairs
Tuning Controls:
- Ch 1/2:
- variable high-pass filter (300-3,000 Hz) or low-pass (30-300 Hz), 12 dB/octave
- front high input level control — when using amplified factory tweeter wiring
- Ch 3/4:
- variable high-pass or bandpass filter (HP: 30-300 Hz; Bandpass: 500-5000 Hz, 12 dB/octave)
- Ch 5:
- variable low-pass filter (30-300 Hz, 12 dB/octave)
- AccuBASS® circuitry for improved bass response
- 30-band graphic EQ, parametric filters, phase correction
- time delay/alignment for inputs and outputs
- RTA (real-time analyzers) for inputs and outputs
Other Features:
- inputs: 6 preamp-level and 8 summable speaker-level
- GTO™ (Great Turn On) signal-sensing turn-on with Ch1/2 speaker-level input
- optional wired remote level controller available
- fuse rating: 30A x 4
- wiring and hardware not included with amplifier
- 4-gauge power and ground leads recommended
- dimensions: 11-15/16"W x 2-1/8"H x 8-1/16"D
- warranty: 5 years
- MFR # D-5.1300
- Item # 161D51300
What's in the box:
AudioControl D-5.1300 owner's manual
- 5-Channel DSP amplifier
- Four 30A ATO fuses (installed)
- 10' USB cable (type-A on one end / micro-B on other end)
- 2.5mm Allen key
- Quickstart guide
- Product testing certification
Features & specs
| Performance | ||
|---|---|---|
| RMS Power Output (Watts x Channels) | 100 x 4 500 x 1 |
|
| Peak Power Output (Watts x Channels) | N/A | |
| Power at 2 Ohms (Watts x Channels) | 200 x 4 | |
| Power at 1 Ohm (Watts x Channels) | --- | |
| Bridged Power (Watts x Channels) | 400 x 2 | |
| Minimum Impedance Bridged | 4 | |
| Minimum Impedance Unbridged | 2 | |
| Minimum Impedance | 2 | |
| Best Frequency Response | 20Hz-22k Hz | |
| THD at Rated RMS Power | 0.1% | |
| Signal to Noise Ratio | 102 dB | |
| Input Voltage | 14.4v | |
| Features | ||
| Amplifier Class | D | |
| Low-Pass Crossover Frequency | 25Hz-20kHz (DSP) | |
| Low-Pass Slope (dB/octave) | 12 or 24dB/oct | |
| High-Pass Crossover Frequency | 25Hz-20kHz (DSP) | |
| High-Pass Slope (dB/octave) | 12 or 24dB/oct | |
| Bass Boost | AccuBASS | |
| Bass Boost Frequency | Adjustable | |
| Fan Cooled | No | |
| Fuse Rating | 120 | |
| Speaker Level Inputs | Yes | |
| Preamp Outputs | 2 | |
| Width (inches) | 11-15/16 | |
| Height (inches) | 2-1/8 | |
| Depth (inches) | 8-1/16 | |
| Parts Warranty | 5 Years | |
| Labor Warranty | 5 Years | |
Features
Overview: The AudioControl D-5.1300 is a 5-channel amplifier, featuring AudioControl's powerful Matrix DSP sound processing. The amplifier accepts speaker-level or line-level inputs, and can be configured for 3-, 4-, or 5-channel operation. The D-5.1300 features a black brushed aluminum chassis, with black powder-coated cast alloy heat sinks and a one piece bottom panel. A black brushed-aluminum cover is provided to protect the amp controls from tampering. A 2.5mm Allen wrench (supplied) is needed to remove the cover. The D-5.1300 offers 4 x 100W RMS (@4Ω) with a 1 x 300W RMS (@4Ω) mono subwoofer output.
Specifications
Power Output: The D-5.1300 has the following power specs:
- 4 x 100 W RMS @ 4 Ohms
- 4 x 200 W RMS @ 2 Ohms
- 2 x 400 W RMS @ 4 Ohms bridged
- 1 x 300 W RMS @ 4 Ohms
- 1 x 500 W RMS @ 2 Ohms
Frequency Response: 20Hz - 22kHz
S/N Ratio: 102dBa (ref. 200 watts @ 2 ohms)
THD+N: < 0.1%
Input Sensitivity:
- Line Level: 500mV to 6V RMS
- Speaker Level: 3V to 40V
Dimensions: Width = 11.92", Height = 2.10", Depth = 8.02"
Weight: 7.2 lbs.
Important Note: Some factory radios and amplifiers will not work without sensing that its speakers are connected to their outputs. If you don't have output from your factory system after installing this amplifier, you'll need an AudioControl load-sensing adapter (sold separately) to correct the issue.