Deaf Bonce Avatar PS-180.4 4-Channel Car Amplifier – 1,040W Max Power, 2-Ohm Stable, Bridgeable
High-Output Power for Your Whole System, in One Compact Amp
The Avatar PS-180.4 4-channel car amplifier delivers serious, clean power for front stages, rear speakers and bridged setups, all from a single chassis. It puts out 4 × 180W RMS at 4 ohms and 4 × 260W RMS at 2 ohms (1,040W total). Bridged, it delivers 2 × 520W RMS, enough to drive larger speakers or a subwoofer from one amplifier.
At 10.63" × 5.32" × 2.05", it fits under seats, behind panels and in tight trunk spaces where a full-size amplifier won't.
Technical Specifications
| Spec | Details |
|---|---|
| Model | Avatar PS-180.4 |
| Channels | 4-channel amp |
| Power @ 4Ω | 180W RMS × 4 |
| Power @ 2Ω | 260W RMS × 4 |
| Bridged power | 520W RMS × 2 |
| Total power @ 2Ω | 1,040W |
| Crossover frequency | 50 Hz – 12 kHz (variable HPF/LPF) |
| Crossover slope | 12 dB/octave |
| Input sensitivity | 0.4 – 6V |
| Signal-to-noise ratio | ≥ 90 dB |
| Fuse rating | 187A |
| Power terminals | 4 AWG / 21.2 mm² |
| Working voltage | 9 – 16.5V |
| Protection | Yes |
| Dimensions (L × W × H) | 10.63" × 5.32" × 2.05" (270 × 135 × 52 mm) |
| SKU | DEF-PS-180.4 |
| GTIN | 4650185712814 |
Why Choose the Avatar PS-180.4?
- Serious 4-channel power: 180W RMS × 4 at 4Ω, 260W RMS × 4 at 2Ω
- 1,040W total output: plenty of headroom for demanding front and rear stages
- Bridgeable to 2 × 520W: flexible for larger speakers or subwoofers
- Independent tuning per channel pair: separate gain and crossover controls for channels 1-2 and 3-4, so you can set front and rear stages separately
- Variable HPF/LPF crossover (50 Hz – 12 kHz): with switchable modes for each pair, to suit mids, tweeters, coaxials or subs
- Per-pair clip indicator LEDs: show when the signal starts to distort, so you can set gain properly and protect your speakers
- Full protection system: built for reliability when the amp is pushed hard
- 187A fuse rating and 4 AWG power terminals: accept up to 21.2 mm² wire for high-current installs
- Compact, install-friendly chassis: high output without a big footprint
Perfect For
- Upgrading factory or aftermarket front and rear speakers
- Powering high-power component sets and coaxials
- Bridged setups for larger speakers or a compact subwoofer
- Builds where space is limited but output matters
Compatibility
Works with 12V vehicle electrical systems (9–16.5V working range). Suitable for cars, trucks and SUVs. For best results, use quality 4 AWG wiring, a solid ground and a suitable fuse. Because this amp draws more current than the PS-150.4, make sure your charging system and wiring are up to the job.
FAQ
How much power does the Avatar PS-180.4 make?
180W RMS × 4 at 4Ω, 260W RMS × 4 at 2Ω (1,040W total), or 520W RMS × 2 bridged.
Can I bridge the PS-180.4?
Yes. Bridging channel pairs gives 2 × 520W RMS.
Is it 2-ohm stable?
Yes. It's rated at 260W RMS per channel at 2 ohms.
Can it run a subwoofer?
Yes. Bridged, it delivers 520W RMS per bridged pair, and the low-pass filter lets you set the crossover for a sub. Match your sub's impedance and power handling to the bridged output.
Will it fit in a small space?
Yes. It measures 10.63" × 5.32" × 2.05", so it fits under most seats and in tight trunk areas.
What wire size do I need?
The power terminals accept 4 AWG (21.2 mm²) wire.
Free shipping is available within the 48 U.S. states. Orders placed before 11 PM ET are typically processed the next business day and arrive within 5–8 business days. Tracking information will be provided as soon as your order ships.
Need to make a change to your order? Contact us within 24 hours of purchase, and we'll be happy to help. Please note that orders already processed for shipment cannot be canceled.
1-Year Limited Warranty: As an authorized dealer, we provide a 1-year limited warranty covering manufacturer defects in materials and workmanship under normal use. The warranty does not cover physical damage, misuse, improper installation, or normal wear and tear.
Customer Support : 9:00 am to 5:00 pm
Email: info@eliteautogear.com
For technical support questions, contact us at cs@eliteautogear.com
Phone: (877)-215-8187
From Our Community
Real Installs. Real Sound.
See what enthusiasts are saying — straight from their builds
Clean Power, Properly Delivered
Amplification That Holds Up Under Load
Stable Power Delivery
Built to hold its rated output under real load, so volume stays clean instead of falling away when the bass hits.
Protection Built In
Thermal, short-circuit and impedance protection shut the amp down safely rather than letting it fail.
Tuning Control
Onboard gain, crossover and bass controls let you match the amp to your speakers or subs instead of guessing.
Install-Ready
Standard terminals and mounting points make it straightforward to fit with the correct amp kit and fusing.
